BloomStar FLUXshield Habibi 150 (50W) – Full-Spectrum LED Grow Light for Small Indoor Areas
The BloomStar FLUXshield Habibi 150 is a compact, plug-and-play LED grow light for indoor gardening. It delivers a dimmable photon flux of approx. 155 µmol/s, making it ideal if you want to reliably grow from seedling to flowering/fruiting in a small area – without changing lamps. Thanks to its large, passive cooling surface, it runs fanless, pleasantly cool, and practically silent.
At a Glance
-
Full spectrum (cSpec Enhanced) for the complete plant cycle
-
Up to 60×60 cm illumination area (depending on setup/requirements)
-
PPFD at 60×60 cm: over 420 µmol/(m²·s) (manufacturer specified)
-
Continuously dimmable (10–100%) + Standby/Off on the integrated dimmer
-
Externally controllable via 0–10V or PWM (terminal on the driver)
-
Passively cooled: no fan, no humming
-
Acrylic coating on the front: protection against moisture/splashing water
- Made in Germany
Who is the Habibi 150 suitable for?
If you are looking for a 50W LED grow light that "just works" in small setups, the Habibi 150 is a very good fit: for 60×60 grow tents in the moderate range, compact plant shelves, propagation stations, herbs/chilli/tomatoes in an indoor garden, or as an efficient solution for limited spaces. Its dimming capability allows for precise adjustment to different plants and growth phases.
Spectrum & LED Configuration: Full Spectrum without Compromise
The cSpec Enhanced full spectrum is designed for all growth phases – from seedling to fruiting/flowering. It features a finely tuned mix of Seoul Semiconductor 3030E, Samsung LM301H Evo, and Osram Oslon Square Gen 5. This ensures even light distribution, solid penetration depth, and pleasant color rendering (ideal if you like to assess plants "by eye").
Light Output in Small Areas: How to Use PPFD & Dimming Effectively
The Habibi 150 is not a "powerhouse" for huge areas – and that's precisely its advantage: In small setups, you get controllable light that can be precisely dosed. In practice, it's better to work with dimming (and maintain a moderate distance) rather than ultra-close at 100%. This avoids stress, hot spots, and unnecessarily high water consumption.
| Phase (Guidance) |
Distance |
Dimmer Starting Point |
Practical Tip |
| Seedlings / Cuttings |
35–45 cm |
10–30% |
Check leaf color & internodes, increase slowly |
| Growth / Vegetative |
30–40 cm |
30–70% |
If growth is very compact, dim slightly or increase distance |
| Flowering / Fruiting |
30–40 cm |
60–100% |
Only go to 100% if climate/water balance is suitable |
Mounting & Control (Plug & Play)
The fixture is fully wired and ready for immediate operation. You can continuously adjust the power with the integrated dimmer, and the lamp can also be switched to standby/off. If you want to control multiple lamps synchronously, you can feed an external 0–10V or PWM signal via the terminal (practical tip: set the integrated dimmer to 100% for external control).
Scope of Delivery
-
BloomStar FLUXshield Habibi 150 LED lamp (plug-and-play)
-
Power cable (approx. 2.5 m)
-
1 pair of rope hangers (Heavy-Hangers)
Tips & Tricks for Better Results
-
Dim instead of "too close": If you want to get closer, reduce the power – this is usually less stressful.
-
Reflexion matters: In a well-reflecting box (light walls/Mylar), you'll get significantly more out of 50W class lamps.
-
Don't forget air circulation: Slight leaf movement helps against hot spots and stabilizes the microclimate.
-
Control humidity: Acrylic protection is great – but keep drivers/connections dry (avoid spray mist).
-
Measurably better: If you have a PAR/PPFD meter, set up a reproducible setting (distance + dimmer).
-
Keep clean: A film of dust on the surface reduces output – occasionally wipe dry.
Suitable Accessories & Useful Upgrades
If you want to intensively use the 60×60 cm area instead of "mini", next check out the BloomStar FLUXshield 300. For pure propagation/growth (without focusing on flowering/fruiting), the Habibi 140 (growth) is a suitable alternative.
More background & practice: BloomStar Habibi 150 – Grow LED in Test (Blog)
FAQ
What area is the Habibi 150 suitable for?
As a guide, up to 60×60 cm is possible – depending on how intensely you want to grow. For delicate plants/propagation, this is very relaxed; for maximum intensity over the full area, a stronger board may be more suitable.
Can I cover the entire plant cycle with it?
Yes. The cSpec Enhanced full spectrum is designed for all phases. You control the intensity via distance and dimmer.
Is the lamp loud?
No. The Habibi 150 is passively cooled and operates without a fan – making it practically silent.
Can I control the lamp externally?
Yes. An external 0–10V or PWM signal can be connected via the terminal. For external control: set the integrated dimmer to 100%.
How do I prevent light stress in young plants?
Start with more distance and lower dimming. If leaves become very light, curl up, or tips "bleach out," simply dim by 10–20% or hang 5–10 cm higher.
Is the Habibi 150 suitable for humid environments?
The front is protected by an acrylic coating. Nevertheless, do not spray directly, keep connections dry, and ensure good air circulation in high humidity.
Technical Data
| Power consumption (max.) |
approx. 54 W |
| Input voltage |
100–305 VAC (50/60 Hz) |
| Standby |
< 0.5 W |
| Photon flux (PPF) |
approx. 155 µmol/s |
| Photon efficiency |
Module approx. 3.05 µmol/J · System approx. 2.85 µmol/J |
| Color temperature |
3850 K |
| CRI |
> 85 |
| Beam angle |
120° |
| Recommended distance |
approx. 30–40 cm (depending on dimming/phase) |
| Dimensions |
approx. 32 × 12 × 8 cm |
| Weight |
approx. 1.0 kg |
| Cable length |
approx. 2.5 m |
| Life expectancy |
approx. 50,000 h |
| Power factor |
> 95% |
Shipping & delivery information can be found here: Shipping information
Manufacturer Information
-
Name: BloomStar
-
Street: Niederhofener Str. 8
-
Postal Code, City: 86972 Altenstadt
-
Country: Germany (Bavaria)
-
Email: info@cre.sience
-
Homepage: https://www.bloomstar.de
