BloomStar Pro 720 3.0 DUAL-Spec

Buy BloomStar Pro 720 3.0 DUAL-Spec – Grow LED CSC & Homegrow LED 150x150 with 2 Spectrums

The BloomStar Pro 720 3.0 DUAL-Spec is a modern 2-channel LED grow light (720 W) for those who want not just "a lot of light" but also control in a 150x150 area: a powerful main channel for growth plus a switchable bloom booster with an increased red/far-red component. This makes it a popular Grow LED CSC – and at the same time a Homegrow LED 150x150 for ambitious indoor gardeners who appreciate reproducible results.

If you're still orienting yourself: In our LED Grow Lights category, you'll find alternatives by area & budget – and under BloomStar LEDs, you'll find more models from the same line.

Why 2-channel (Dual-Spec) makes such a difference in practice

• Precisely control growth: In veg mode, the main channel runs with a practical color temperature (compact, stable, little "stretch").
• Targeted bloom "docking": When switching/adjusting, you can gradually add the booster instead of changing everything at once.
• More reserve without modification: If your climate is right (exhaust/temperature/CO₂), you can increase the photon load without changing the light.

Which area is the BloomStar Pro 720 3.0 suitable for?

• Optimal: LED Grow Lighting 150 x 150 cm (even illumination due to bar design, fewer hot spots).
• High-Intensity / CO₂ Setups: up to approx. 140 x 140 cm, very high DLI targets are realistic (depending on strain, climate and control).
• CSC / Growing Association: ideal if several fixtures are to be neatly grouped and controlled via a controller.

Technical Highlights

• Efficiency: ePPE > 3.0 µmol/J
• Photon Flux (ePPF): 1970 µmol/s (Main) / 2260 µmol/s (Boost)
• Power: 640 W (Main Channel) / 720 W (with Booster)
• Spectrum Main: B18 / G33 / R48 / FR2 %
• Spectrum Boost: B15 / G28 / R51 / FR5 %
• Protection: IP65 (dustproof, jet-water protected)
• Control: internally dimmable + externally via RJ-12 / 0–10 V, Daisy-Chain capable

Controller & Dimming (RJ-12 / 0–10 V) – how to use it meaningfully

You can dim both channels internally or control them externally via the RJ-12 interface (0–10 V). For setups with multiple lights, external control is almost always worthwhile – because you get daily profiles, group control, and clean repeatability.

• 1-channel controller: Control main channel (growth/base load).
• 2-channel setup: Regulate booster separately (bloom push, final phase, fine-tuning).
• Climate integration: If light & climate are to work together, a climate controller with 0–10 V is invaluable, e.g., GrowBase Lite.

Tips & Tricks for 150x150

• Mounting height as a starting point: usually 30–50 cm above the canopy. It's better to hang it a little higher and smooth it out with dimming, rather than running "too close."
• Dimming instead of stress: Don't go full throttle for 2–3 days after repotting – plants appreciate consistency more than peak values.
• Gain in edge areas: Make sure to hang it truly centered. Bar LEDs are very forgiving – but if mounted crooked, you'll visibly lose out on the edges.
• Humidity + IP65: IP65 helps against splashes/dust – but it doesn't replace proper air circulation. For stable conditions: suitable activated carbon filters + solid exhaust.
• Cleverly use "Booster": Slowly ramp up during the generative phase. If leaf tips lighten or leaves "taco," it was too much – then slightly reduce the boost.

Scope of Delivery

• 1× LED fixture including power supply
• 2× Y-Hangers
• 1× Schuko power cable (3 m)
• 3× RJ-12 cables
• 1× RJ-12 Y-splitter (separate controller possible for each channel)

Technical Data

FAQ – frequently asked questions (short & clear)

Manufacturer Information & Product Safety

Manufacturer: BloomStar
Street: Niederhofener Str. 8
Zip, City: 86972 Altenstadt
Country/State: Germany, Bavaria
Email: info@cre.sience
Homepage: https://www.bloomstar.de