SANLight EVO 3-100 200W 1.5

SANlight EVO 3-100 1.5 (200W) – LED Grow Light for 100×50 cm with 545 µmol/s

The SANlight EVO 3-100 1.5 is an uncompromising LED plant light for anyone who wants to illuminate 50×100 / 100×50 cm truly perfectly – without hotspots, without a noisy fan, without DIY solutions. With 200 watts of power consumption, 545 µmol/s PPF and an efficiency of > 3 µmol/J, this LED grow light plays in the premium league: plenty of usable light (PAR/PPFD-relevant), evenly distributed, robustly built and designed for long operating times.

The crucial aspect of the EVO series is not just "lots of light," but homogeneity: The asymmetrical secondary optics direct photons where they are needed on the surface. Especially in rectangular grow tents (e.g., 100×50), this acts like an upgrade because edge areas don't suffer, and you can operate more relaxed overall – even when dimming.

At a Glance (Key Reasons to Buy)

• Optimized for 100×50 cm (50×100) – ideal for rectangular grow tents & cultivation areas
• 200W power consumption at 545 µmol/s PPF – strong output-to-consumption ratio
• > 3 µmol/J – high efficiency (more photons per watt)
• Full spectrum 400–780 nm – suitable for growth & flowering (one light for the entire cycle)
• IP65 – dustproof, splash-proof, practical for indoor setups
• Passive cooling – silent operation, no fan, no annoying noise
• Protective secondary optics – easier to clean, helps maintain consistent light output long-term

What Area is Realistic?

For a 100×50 cm area, the EVO 3-100 1.5 is one of the most popular solutions because it excels precisely there: rectangular coverage, clean light distribution, and enough reserves to fine-tune with a dimmer if needed.

• 1× EVO 3-100 1.5 – ideal for 50×100 / 100×50 cm
• 2× EVO 3-100 1.5 – very strong setup for 100×100 cm (high intensity & homogeneity)

Tip: If you're working in a highly reflective tent (bright walls, clean condition), the uniformity benefits noticeably. For specific distances, angles, and positioning, the SANlight EVO-Series 1.5 data sheet (PDF) is worthwhile.

Technical Data (SANlight EVO 3-100 1.5)

Scope of Delivery

• 1× SANlight EVO 3-100 1.5 LED Grow Light (200W)
• 1× User Manual
• Important: without power connection cable (available separately)

Why without a cable? Because setups vary (cable length, cable routing, tent angles). You choose the exact cable that fits your installation – instead of putting a standard cable aside.

Matching Accessories (Recommended for a Clean Setup)

• SANlight power cable 2.1 m – classic power connection for common setups
• SANlight power cable 2.1 m (90° angled) – if space is tight in the tent or you want to keep cable management tidy

Dimming pays off – not just for saving electricity, but also for stress-free plant handling:

• SANlight M-Dimmer – robust, simple, adjustable directly on the light fixture
• SANlight Bluetooth Dimmer – convenient control via app, ideal for fine-tuning and repeatable settings

Compatibility Note: Please only use dimmers that are explicitly compatible with the SANlight EVO / EVO 1.5. (Older magnetic dimmers from other series are not compatible.)

Tips & Tricks from Practice (for more control over PPFD & DLI)

• Start moderate, then increase: Especially after switching to a strong horticulture LED, the first few days are crucial. Use a dimmer, observe plants, then increase in steps.
• Distance + Dimmer instead of "too close": If peaks become too bright, hang higher and adjust the power. This keeps the illumination more homogeneous (and your area will thank you for it).
• Easy-Tilting for the Edges: If you notice that one side needs more in the rectangular area, slight tilting can often achieve more than "more wattage."
• Keep Optics Clean: The secondary optics are a performance component. Dust and deposits measurably reduce output. Wipe dry or slightly damp – without aggressive cleaners.
• Don't Forget Climate: More light only works with stable leaf temperature, gentle air circulation, and appropriate humidity. Good air movement makes a difference when you're running high intensities.
• Use Orientation Aids: For positioning & PPFD plot info, SANlight itself provides excellent documentation: PAR Test & PPFD/PPFDe Plots for EVO Series 1.5 .

FAQ for SANlight EVO 3-100 1.5

Manufacturer Information (Product Safety)

• Name: Sanlight
• Street: Montafonerstrasse 14
• Postcode, City: 6780 Schruns
• Country/State: Austria, Vorarlberg
• Email: support@sanlight.com
• Homepage: https://www.sanlight.com