Side Bubbler for Storz & Bickel Venty

Venty Side Bubbler – Water Filter Attachment for Gently Cooled Vapor with your VENTY Vaporizer

The Venty Side Bubbler is a side-mounted glass water filter specifically designed for the Storz & Bickel VENTY Vaporizer. The integrated water cooling makes the vapor noticeably cooler, smoother, and more pleasant – ideal for those who love intense sessions but want to protect their throat and airways. At the same time, the bubbler filters out dust, fine herb residues, and particles from the airflow, so you enjoy almost pure, aromatic vapor.

Whether as an upgrade for your daily setup or an addition for special moments of indulgence: This vaporizer bubbler is a sensible piece of VENTY accessory that extends your device with effective water cooling without losing mobility.

Why a Venty Side Bubbler makes sense

• Noticeably cooler vapor: The water absorbs some of the heat from the vapor – perfect for high temperatures and long draws.
• Smoother inhalation: The vapor feels less harsh, which is pleasant, especially for sensitive throats or frequent use.
• Finer filtration: Small herb particles, dust, and residues remain in the water, making the airflow cleaner.
• Side-mounted design: The bubbler sits on the side of the VENTY and hardly interferes with the natural holding position during draws.
• Glass instead of plastic: Heat-resistant glass ensures a neutral taste and allows you to observe the vapor path.
• Ideal for VENTY power users: Particularly useful if you like to vape at high temperatures or in longer sessions.

How to use the Venty water filter attachment correctly

Before the first use, you should thoroughly test the Venty Side Bubbler before attaching it directly to the vaporizer. Here’s how:

1. Fill with water: Hold the bubbler vertically and slowly pour water from above through the mouthpiece opening. The fill level regulates itself – it’s enough if the lower openings inside are clearly submerged.
2. Check for leaks: Briefly draw or gently blow without the VENTY. If water leaks anywhere, reduce the fill quantity or pour out excess water.
3. Dry the exterior thoroughly: After filling, thoroughly wipe the exterior of the bubbler with a cloth and ideally let it rest for about 1 hour so that any remaining drops inside run down.
4. Attach to the VENTY: Carefully attach the bubbler using the supplied gaskets, without force – glass prefers a gentle touch.
5. Inhale carefully: Draw calmly and controlled, not extremely hard. This prevents water from being drawn up.

If you want to empty the bubbler later, you can simply pour out the water. If tiny water residues remain inside, you can blow vigorously into the bubbler to push out the last drops.

Cleaning & Care – How to keep your Venty Side Bubbler fresh for longer

A clean water filter ensures better taste and clear airflow. Clean the bubbler regularly – depending on the frequency of use:

• Quick cleaning in between: Rinse with warm water and let dry briefly.
• Thorough cleaning:
  • Soak the bubbler in isopropyl alcohol (ISO), some dish soap, or a cleaner like Schmand Weg.
  • Always rinse thoroughly with clear water afterward.
  • Then let it dry completely before using it with the vaporizer again.
• Practical tip: A Ziplock bag is perfect as a "mini cleaning bath." Check beforehand if the bag has no tears, put the cleaner and bubbler in, and shake gently.

Important: The bubbler can get wet, but your VENTY Vaporizer cannot. Vaporizers contain electronics – they should never come into contact with water.

Tips & Tricks for everyday use with the Venty Side Bubbler

• Fine-tune the fill level: If water splashes up when drawing, the water level is usually a bit too high – drain a minimal amount of water until the draw bubbles pleasantly.
• Fresh water = better taste: Change the water regularly, ideally before each session. Old liquid can affect the taste.
• Use on the go: For transport, carry the bubbler as empty and dry as possible and only fill it with water just before the session.
• Combination with high temperatures: Especially with higher temperature settings of the VENTY, the water filter shows its strengths because the vapor becomes significantly smoother.
• Gentle draws: Slow, controlled inhalation not only ensures better taste but also prevents water from entering the mouthpiece.

FAQ – Frequently Asked Questions about the Venty Side Bubbler

Question: Does the Venty Side Bubbler fit every Storz & Bickel VENTY?
Answer: Yes. The bubbler is designed for the Storz & Bickel VENTY Vaporizer and comes with suitable gaskets. Simply attach it, check for leaks, and start vaping.

Question: Does the water filter change the taste of my herbs?
Answer: The water primarily filters particles and some heat, not the aroma itself. Many users even find the taste clearer because the vapor is less harsh, and the flavors are perceived more consciously.

Question: How full should I fill the bubbler?
Answer: It is sufficient if the lower openings inside are clearly submerged, and pleasant percolation occurs when drawing. If water is drawn up during inhalation, the fill level is too high.

Question: Can I use liquids other than water?
Answer: Only clear water is recommended. Other liquids (e.g., juices, alcohol) can leave sticky residues, discolor the glass, or significantly complicate cleaning.

Question: How often should I clean the Venty Side Bubbler?
Answer: With regular use, a quick rinse after a few sessions is advisable. A thorough cleaning with isopropyl alcohol, dish soap, or a special cleaner is recommended every few days to weeks, depending on use.

Question: Is the bubbler also compatible with other vaporizers?
Answer: The Side Bubbler is primarily designed for the VENTY Vaporizer. It can only be used with other devices if suitable adapters are available. We recommend it as a specialized VENTY accessory.

Technical Data

• Product: Venty Side Bubbler – Water Filter Attachment for Vaporizer
• Compatibility: Storz & Bickel VENTY Vaporizer
• Material: Glass
• Bubbler size: W 2.5 cm × H 15.5 cm × Ø 2.5 cm
• Bubbler weight: approx. 59 g (item weight: 0.06 kg)
• Shipping weight: 0.09 kg
• Packaging dimensions: 9.20 × 3.80 × 18.50 cm

Scope of Delivery

• 1 × Venty Side Bubbler
• 2 × Gaskets

Product Safety Information

• Never immerse the vaporizer itself in water or bring it into contact with liquids.
• Do not overfill the bubbler and keep it as upright as possible to avoid water ingress.
• Operate only with clean water; do not continue to use if there is visible damage (cracks, chips).

Manufacturer Information

VDN Berlin GmbH
Karl-Kunger-Str 28
Berlin
Berlin, Deutschland, 12435
E-Mail: shop@verdampftnochmal.de
Website: https://verdampftnochmal.de/