DynaVap BallR Cap – Convection Upgrade for Your DynaVap Vaporizer
The DynaVap BallR Cap is more than just a cap: it transforms your DynaVap into a true convection setup with precise heat delivery, stable temperature, and remarkably clear flavor. Thanks to its extended design, a micro-perforated tip, and a heat chamber filled with stainless steel balls, it delivers smooth, consistent vapor – whether with a torch lighter or induction heater. Another plus is the engraved heating scale, which shows you the optimal heating zone for reliably good draws.
Why the BallR Cap is a Game-Changer
-
True Convection: Air is heated and drawn through the herb material – for gentler extraction, an intense terpene profile, and fewer irritants.
-
Thermal Stability: Stainless steel balls store heat, distribute it evenly, and reduce hot spots.
-
Finely Tuned Airflow: Micro-perforation at the tip improves draw and supports even heating.
-
Precise Control: Engraved heating scale for repeatable sessions – low-temp sips or full extraction, you decide.
-
Compatible & Flexible: Works with most standard bowls and common induction heaters or jet/torch lighters.
Design & Function
The BallR Cap is noticeably longer than standard caps. The upper section houses a ball reservoir made of stainless steel balls, which absorbs energy when heated and releases it constantly during the draw. The perforation at the tip draws in fresh air and guides it through the chamber – this is the core of true convection. The scaling on the outside marks the efficient heating zone for precise heating.
How to Use the BallR Cap
-
Attach: Securely place the cap on the DynaVap. Check the fit before each session.
-
Heat: Using a torch lighter or induction heater, evenly heat the zone marked on the scale, rotating the cap slowly.
-
Wait for the Click: After the first click, the temperature is in the sweet spot. Now draw calmly and adjust the airflow via the airport/CCD to your taste.
-
Cooldown: After approximately 20–30 seconds, the second click will follow. If necessary, heat again until the herbs are fully extracted.
Compatibility
-
Compatible: DynaVap models with standard bowls.
-
Not Compatible: The HyperDyn.
-
Storage Note: Due to the extended cap, the combination of vaporizer + BallR Cap does not fit into all standard cases, such as the Dynastash.
Product Details at a Glance
- True convection instead of pure conduction
-
Stainless steel balls for even heat retention
-
Micro-perforated tip for optimized airflow
-
Engraved heating scale for precise heat placement
- Usable with induction heater or torch lighter
-
Compatible with all standard DynaVap bowls
- Transforms your DynaVap into a convection “ball vaporizer”
Practical Tips & Tricks
-
Vary Heating Zone: Slightly closer to the tip = lower temp & more flavor; further towards the middle = denser clouds & full extraction.
-
Calm Draw: Draw slowly and steadily, this is how convection works most efficiently.
-
Fine-Tune Induction Heater: Start with low to medium power to prevent the ball section from overheating.
-
Material & Packing: Fill loosely, do not pack tightly. Medium-fine grind accelerates extraction and keeps the draw resistance pleasant.
-
Stir in Between: For longer sessions, briefly remove the chamber and loosen the material – ensures even results.
-
Cleaning: Wipe the outside of the cap, no long alcohol baths. Clean the herb chamber separately; leave the ball section untouched.
-
Safety: Remove from heat immediately after the click – avoid overheating. Do not place hot parts directly down.
FAQ – Frequently Asked Questions
How does the BallR Cap differ from standard caps?
The BallR Cap creates true convection thanks to its perforation & stainless steel balls. This results in more consistent vapor production, clearer flavor, and more precise control via the heating scale.
Which lighter works best with it?
A jet/torch lighter (1–2 flames) or an induction heater. The more even the heat, the more reproducible the result.
Can I get low-temp flavor hits?
Yes. Heat the zone closer to the tip, wait for the click, and draw slowly. For denser clouds, choose the zone slightly lower.
Does the BallR Cap fit in my Dynastash?
Due to its longer design, the combination of DynaVap + BallR Cap often does not fit into standard cases like the Dynastash.
Is it compatible with all DynaVap models?
It is compatible with most standard bowls, not with The HyperDyn.
Do I need special accessories?
No, but a good induction heater or a clean-burning jet lighter makes the results more consistent. A tube/case with a bit more length is practical.
Scope of Delivery
- 1 × DynaVap BallR Cap (pre-filled with stainless steel balls)
Manufacturer Information
Manufacturer:
DYSPENSR WHOLESALE
6371 North Towne Road
Windsor, WI 53598
USA
is imported by the following European Responsible Person:
RETAIL NORTH LTD
54 Scarva Road
BT32 3AU Banbridge
Northern Ireland
hello@herbalizestore.com
